Návod k použití PANASONIC KXFT938FX

[. . . ] FT932-938FX_PFQX2588ZA-en. PDF Page 1 Thursday, June 15, 2006 8:30 AM Operating Instructions Personal Facsimile Model No. KX-FT932FX Facsimile with Digital Answering System Model No. KX-FT938FX KX-FT938 Thank you for purchasing a Panasonic fax machine. Please read these operating instructions before using the unit and save for future reference. These units are compatible with Caller ID. To use this feature, you must subscribe to the appropriate service of your service provider. FT932-938FX_PFQX2588ZA-en. book Page 2 Thursday, June 15, 2006 8:30 AM Table of Contents 1. [. . . ] L An extension telephone (if connected to the same line) will not ring at this time. Note: L The maximum recording time for incoming message can be changed (feature #10 on page 33). When the unit answers the incoming call, the greeting message will be heard through the speaker. If this feature is not required, turn OFF feature #67 (page 35). L If the unit announces the memory is full, erase unnecessary messages (page 29). 25 FT932-938FX_PFQX2588ZA-en. book Page 26 Thursday, June 15, 2006 8:30 AM 5. Fax How phone calls and faxes are received When receiving calls, the unit works as an answering machine and/or fax. L If the call is a phone call, the unit will record the caller’s message automatically. L If a fax calling tone is detected, the unit will receive the fax automatically. Receiving a voice message and fax document in one call The caller can leave a voice message and send a fax document during the same call. Inform the caller of the following procedure beforehand. L The answering machine will answer the call. The caller can leave a message after the greeting message. L The unit will activate the fax function. The caller presses the start button to send a fax. Ring setting in TAM/FAX mode You can change the number of rings before the unit answers calls. You can choose from “2” (default), “3”, “4”, “5”, “6”, “7” and “AUTO”. This setting can be changed by feature #06 on page 33. “AUTO”: The unit answers after 2 or 3 rings when new messages have been recorded, and after 5 or 6 rings when there are no new messages. If you call your unit from outside to listen to new messages (page 30), you will know that there are no messages when the unit rings for the 4th time. You can then hang up without being charged for the call. How faxes are received When receiving calls, the unit will automatically answer all calls and only receive fax documents. Note: L The number of rings before a call is answered in FAX ONLY mode can be changed (feature #06 on page 32). 5. 8 Receive polling This feature allows you to retrieve a document by calling an available polling service. [. . . ] 30 m roll ■ Effective printing width: 208 mm ■ Transmission time*1: Approx. 15 s/page (Original mode)*2 ■ Scanning density: Horizontal: 8 pels/mm Vertical: 3. 85 lines/mm – in standard resolution, 7. 7 lines/mm – in fine/photo resolution, 15. 4 lines/mm – in super fine resolution ■ Photo resolution: 64-level ■ Scanner type: Contact Image Sensor ■ Printer type: Thermal printing ■ Data compression system: Modified Huffman (MH), Modified READ (MR) ■ Modem speed: 9, 600 / 7, 200 / 4, 800 / 2, 400 bps; Automatic Fallback ■ Operating environment: 5 °C – 35 °C, 20 % – 80 % RH (Relative Humidity) ■ Dimensions: Approx. height 121 mm × width 352 mm × depth 224 mm ■ Mass (Weight): KX-FT932: Approx. 2. 8 kg ■ Power consumption: Standby: Approx. [. . . ]